 |
Notice the damage caused by the PVC cement on the holes and edge.
I also started to countersink many of the holes to keep the screws flush.
|
 |
| Started the assembly of the horseshoe shoulder area as well as the ankles |
 |
| My drill has many uses as well as its batteries :) |
 |
| Close up of the ankle assembly... note I am unable to get screws to flush mount through this piece, I will use combination of screws / Glue to handle the task. |
 |
| Close up of the horseshoe piece being glued to the leg assembly |
 |
| Applied the top detail of the ankle... note there is nothing really strong about it. Its completely hollow, I am going to use some sort of spray foam to fill... |
 |
| Completed leg assemblies... out drying |
 |
| Another view of the angle detail |
 |
| Completed horseshoe attached via hooks, this is removable as per the A&A docs assembly |
 |
| Note the damage from the Glue on the surface |
